人生就是博·(中国)尊龙AG旗舰厅

人生就是博·(中国)尊龙AG旗舰厅(LianLian Global)官网首页

shopify Star Micronics TSP100IIIBI 蓝牙无线收条打印机先容

shopify Star Micronics TSP100IIIBI ,蓝牙无线收条打印机
2022/03/31
自建站

Star Micronics TSP100IIIBI 蓝牙无线收条打印机

型号：TSP143IIIBI

要求

若要在您的 Shopify 市肆中使用此硬件，，，，，您需要知足以下要求：

  • 全新 Shopify POS

  • 运行 iOS 12.2 或更高版本的兼容 iPad 或 iPhone 或者运行 5.0 版 (Lollipop) 或更高版本的兼容 Android 装备

在那里购置蓝牙无线收条打印机


Star Micronics TSP100IIIBI 蓝牙无线收条打印机可在 Shopify 硬件市肆中用于美国、加拿大、英国、爱尔兰、丹麦、比利时和西班牙的商家。。。。。。

为您的蓝牙无线收条打印机购置纸张


任何切合以下规格的热敏纸卷都可用于此打印机：

宽度80 mm 标准宽度
厚度介于 0.053 mm 与 0.085 mm 之间
辊筒直径最大 83 mm

有关怎样装入收条打印机的说明，，，，，请参阅制造商的硬件手册中的指南。。。。。。

插入蓝牙打印机


您需要先将蓝牙打印机毗连到电源，，，，，然后才华最先使用。。。。。。

办法：

  1. 将电源电缆的一端插入收条打印机的背面。。。。。。

  2. 将电缆的另一端插入电源插座。。。。。。

  3. 翻开打印机。。。。。。准备停当指示灯将变为纯蓝色。。。。。。未装入纸张时，，，，，过失指示灯呈红色闪灼。。。。。。

若是纸张已装入，，，，，即可打印诊断报告。。。。。。

然后，，，，，您就可以将打印机与 iPad 配对。。。。。。

将蓝牙无线收条打印机与 iPad 配对并毗连


配对可使装备相互识别，，，，，并在它们之间建设联系。。。。。。这使得已配对的装备可在未来举行毗连，，，，，而无需重复举行身份验证检查。。。。。。

Star Micronics TSP100IIIBI TSP100IIIBI 蓝牙无线收条打印机（型号 TSP143IIIBI）附带自动毗连功效。。。。。。这意味着在打印机与 iPad 配对后，，，，，只要打印机处于 iPad 的规模内，，，，，每次翻开打印机时都会自动建设蓝牙毗连。。。。。。

备注

在将收条打印机与 Shopify POS 配对之前，，，，，请确保收条打印机已准确装入纸张。。。。。。

办法：

  1. 将打印机毗连到电源。。。。。。

  2. 翻开 iPad 上的 设置。。。。。。

  3. 点击蓝牙菜单选项。。。。。。在其他装备列表中找到 Star Micronics 打印机，，，，，其名称类似于 TSP100-XXXXX。。。。。。

    • 若是您受邀下载此打印机的相关应用，，，，，您可以连忙或稍后举行下载。。。。。。若是您妄想禁用自动毗连，，，，，则需要此应用。。。。。。

  4. 点击收条打印机 TSP100-XXXX，，，，，期待配对历程完成。。。。。。当打印机移至我的装备列表并且其名称右侧显示已毗连时，，，，，即体现配对已完成。。。。。。

禁用自动毗连


TSP100IIIBI 蓝牙收条打印机默认启用自动毗连功效。。。。。。这体现只要打印机在已与之配对的 iPad 规模内，，，，，每次启动打印机时，，，，，打印机都会自动毗连。。。。。。

若是您不希望配对的打印机在每次翻开时都自动举行毗连，，，，，则需要禁用自动毗连。。。。。。当您使用多台 iPad 和一台打印机时，，，，，这也是禁用自动毗连的一个缘故原由。。。。。。

办法：

  1. 确保您的打印机已与您的 iPad 配对。。。。。。

  2. 在 Apple 应用市肆中下载 Star Micronics 建设的 TSP100III Utility（TSP100III 适用程序）应用。。。。。。

  3. 翻开 TSP100III Utility 应用，，，，，然后在所选装备部分中点击作废选择状态。。。。。。

  4. 在选择装备屏幕上，，，，，选择收条打印机并点击应用。。。。。。收条打印时机被命名为 TSP100IIIBI 或类似的名称。。。。。。

  5. 在设置部分，，，，，点击 Bluetooth settings（蓝牙设置）。。。。。。

  6. 禁用自动毗连选项，，，，，然后点击应用。。。。。。在新配对权限提醒处点击继续以生涯设置。。。。。。

  7. 翻开 iPad 上的 设置。。。。。。

  1. 点击蓝牙菜单选项。。。。。。

  2. 点击我的装备下的收条打印机以重新毗连。。。。。。

收条打印机不会再自动毗连到 iPad。。。。。。从现在最先，，，，，您每次启动打印机或重启 iPad 时，，，，，都需要返回 iPad 蓝牙设置（而不是 Shopify POS 应用设置），，，，，然后从我的装备列表中选择打印机。。。。。。

启用自动毗连


要启用收条打印机的自动毗连功效，，，，，请重复禁用自动毗连中的办法，，，，，但在办法 6 中启用自动毗连。。。。。。

将蓝牙无线收条打印机与 iPad 毗连后


毗连您的打印机后，，，，，请记着执行以下操作：

  • 将其设置为默认打印机（可�。。。。。。�

  • 打印测试收条

  • 测试与现金抽屉的毗连（若是适用）。。。。。。

将 iPad 与收条打印机作废配对


您可以将 iPad 与收条打印机作废配对。。。。。。

办法：

  1. 关闭打印机。。。。。。

  2. 翻开 iPad 上的 设置。。。。。。

  1. 点击蓝牙菜单选项以审查配对的蓝牙装备。。。。。。

  2. 点击打印机名称旁边的 i 符号，，，，，然后点击遗忘此装备以从蓝牙装备列表中删除打印机。。。。。。

  3. 在 Shopify POS 的硬件设置屏幕中，，，，，向左轻扫蓝牙收条打印机以显示删除按钮。。。。。。

  4. 点击删除。。。。。。


将收条打印机恢复出厂设置

您可以将收条打印机恢复出厂设置。。。。。。

办法：

  1. 作废将您的 iPad 与收条打印机配对。。。。。。

  2. 关闭打印机后，，，，，找到位于打印机背面的重置按钮，，，，，然后用笔按住该按钮。。。。。。

  3. 按住重置按钮，，，，，同时翻开打印机。。。。。。当过失指示灯闪灼时，，，，，松开该按钮。。。。。。

  4. 期待直至过失指示灯阻止闪灼。。。。。。要完成重置，，，，，请再次关闭打印机，，，，，期待 5 秒钟，，，，，然后再次翻开打印机。。。。。。

打印机现已完全重置，，，，，并已准备好与 iPad 配对。。。。。。

若是您使用的型号为 TSP143IIIBI，，，，，则重置将启用自动毗连，，，，，但您需要再次配对装备。。。。。。

使用 Star Micronics TSP100IIIBI Bluetooth wireless 收条打印机的限制

Shopify POS 与 Star Micronics TSP100IIIBI Bluetooth wireless 收条打印机之间保存一种奇异的 1 对 1 关系，，，，，也就是说：

  • 您无法将多台 iPad 毗连到统一打印机。。。。。。

  • Shopify POS 无法与多台打印机同时势情。。。。。。

对 Star Micronics TSP100IIIBI 举行故障扫除


若是您在使用 Star Micronics TSP100IIIBI 时遇到问题，，，，，请实验以下故障扫除办法。。。。。。

办法：

  1. 检查您是否具备以下基本要求：

    • 您的 Shopify POS 应用是最新的。。。。。。

    • iPad 上的 iOS 版本是最新的。。。。。。

    • 您的 iPad 已启用蓝牙。。。。。。

  2. 检查打印纸是否已准确装入，，，，，以及状态指示灯是否为纯蓝色。。。。。。

  3. 作废将您的 iPad 与收条打印机配对。。。。。。

  4. 将收条打印机恢复出厂设置。。。。。。

  5. 将您的 iPad 与收条打印机配对。。。。。。

  6. 重启打印机。。。。。。

  7. 翻开 iPad 上的 设置。。。。。。

  1. 点击蓝牙菜单选项，，，，，确认 Star Micronics 打印机显示为未毗连。。。。。。

  2. 点击打印机以举行毗连。。。。。。

  3. 当打印机显示为已毗连时，，，，，请再次重启。。。。。。打印机翻开时，，，，，它应在短时间内显示为未毗连，，，，，然后显示为已毗连。。。。。。

  4. 若是第二次重启打印机时打印机没有自动毗连，，，，，则您需要启用自动毗连。。。。。。

  5. 通过打印测试收条来测试打印机。。。。。。

若是在实验这些办法后仍然无法使用收条打印机，，，，，请联系 Shopify 支持。。。。。。

Shopify商户官网原文详情：

Star Micronics TSP100IIIBI Bluetooth wireless receipt printer

Model number: TSP143IIIBI

Requirements

To use this hardware with your Shopify store, you need to meet the following requirements:

  • the all-new Shopify POS

  • a compatible iPad or iPhone that is running iOS 12.2 or higher OR a compatible Android device that is running version 5.0 (Lollipop) or higher

Where to buy the Bluetooth wireless receipt printer


The Star Micronics TSP100IIIBI Bluetooth wireless receipt printer is available from the Shopify Hardware Store for merchants in United States, Canada, United Kingdom, Ireland, Denmark, Belgium, and Spain.

Buy paper for your Bluetooth wireless receipt printer


Any thermal paper rolls works with this printer, if the paper meets the following specifications:

Width80mm standard
ThicknessBetween 0.053 mm and 0.085 mm
Roll diameterUp to 83 mm

For an explanation of how to load the receipt printer, refer to the guide in the manufacturer's hardware manual.

Plug in your Bluetooth printer


Before you can use your Bluetooth printer, you need to connect it to a power supply.

Steps:

  1. Plug one end of the power cable into the back of your receipt printer.

  2. Plug the other end of the cable into a power outlet.

  3. Turn the printer on. The Ready indicator turns a solid blue. The ERROR indicator blinks red when no paper is loaded.

If paper is loaded, then a diagnostic report prints.

After this, you're ready to pair the printer with your iPad.

Pair and connect the Bluetooth wireless receipt printer with your iPad


Pairing identifies devices to each other and establishes a bond between them. This enables the paired devices to connect in the future without repeating authentication checks.

The Star Micronics TSP100IIIBI Bluetooth wireless receipt printer (model number TSP143IIIBI) comes with auto-connect enabled. This means that after you've paired your printer with your iPad, the Bluetooth connection is established automatically every time the printer is switched on and in range of your iPad.

Note

Make sure that the receipt printer has paper correctly loaded before you pair it with Shopify POS.

Steps:

  1. Connect your printer to a power supply.

  2. Open the iPad's Settings.

  3. Tap the Bluetooth menu option. Find the Star Micronics printer in the Other devices list, with a name like TSP100-XXXXX.

    • If you're invited to download an associated app for this printer, then you can do so now or later. You need this app if you intend to disable auto-connect.

  4. Tap the receipt printer TSP100-XXXX and wait for the pairing process to complete. The pairing is complete when the printer moves to the My devices list and has Connected displayed to the right of its name.

Disable auto-connect


By default, the TSP100IIIBI Bluetooth receipt printer is shipped with auto-connect enabled. This means that a paired printer connects automatically whenever it's turned on and within range of the iPad that it has been paired with.

If you don't want your paired printer to connect automatically every time you switch it on, then you need to disable auto-connect. One reason for disabling auto-connect is if you use multiple iPads with a single printer.

Steps:

  1. Make sure your printer is paired with your iPad.

  2. From the Apple App Store, download the TSP100III Utility app, created by Star Micronics.

  3. Open the TSP100III Utility app, and then tap Unselected state in the Selected device section.

  4. On the Select device screen, select the receipt printer and tap Apply. The receipt printer is named TSP100IIIBI or something similar.

  5. In the Configuration section, tap Bluetooth settings.

  6. Disable the Auto connection option, and then tap Apply. Tap Continue at the new pairing permission prompt to save the settings.

  7. Open the iPad's Settings.

  8. Tap the Bluetooth menu option.

  9. Tap the receipt printer under My devices to re-connect.

The receipt printer no longer connects automatically to the iPad. From now on, every time you switch on the printer or restart the iPad, you need to return to the iPad Bluetooth settings (not the Shopify POS app settings) and select the printer from the My devices list.

Enable auto-connect


To enable the receipt printer's auto-connect function, repeat the steps in disable auto-connect but enable Auto-connect in step 6.

After you've connected the Bluetooth wireless receipt printer with your iPad


After connecting your printer, don't forget to:

  • Set it as the default printer (optional)

  • Print a test receipt

  • Test the connection to the cash drawer (if applicable).

Unpair your iPad and receipt printer


You can unpair your iPad and receipt printer.

Steps:

  1. Turn off the printer.

  2. Open the iPad's Settings.

  1. Tap the Bluetooth menu option to see your paired Bluetooth devices.

  2. Tap the i symbol to the right of the printer name, and then tap Forget this device to remove the printer from your Bluetooth devices list.

  3. From the Hardware settings screen of Shopify POS, swipe Bluetooth receipt printer left to show a Delete button.

  4. Tap Delete.


Return your receipt printer to its factory settings

You can return your receipt printer to its factory settings.

Steps:

  1. Unpair your iPad and receipt printer.

  2. With the printer turned off, find the reset button located on the back of the printer, and then use a pen to press and hold down the button.

  3. While holding down the reset button, turn on the printer. When the ERROR light flashes, release the button.

  4. Wait until the ERROR light stops flashing. To complete the reset, turn off the printer a second time, wait 5 seconds, and then turn on the printer again.

The printer is now fully reset and ready to be paired with your iPad.

If you're using model number TSP143IIIBI, then resetting leaves auto-connect enabled, although you do need to pair your devices again.

Limitations when using the Star Micronics TSP100IIIBI Bluetooth wireless receipt printer

Shopify POS has an exclusive, 1-to-1 relationship with the Star Micronics TSP100IIIBI Bluetooth wireless receipt printer, which means the following:

  • You can't connect multiple iPads to the same printer.

  • Shopify POS won't work with multiple printers at the same time.

Troubleshoot the Star Micronics TSP100IIIBI


If you have trouble using the Star Micronics TSP100IIIBI, then try these troubleshooting steps.

Steps:

  1. Check that you have these basic requirements:

    • Your Shopify POS app is up to date.

    • Your iPad's version of iOS is up to date.

    • Your iPad has Bluetooth enabled.

  2. Check that printer paper is correctly installed and that the status indicator light is a solid blue color.

  3. Unpair your iPad and receipt printer.

  4. Return your receipt printer to its factory settings.

  5. Pair your iPad with the receipt printer.

  6. Restart the printer.

  7. Open the iPad's Settings

  8. Tap the Bluetooth menu option and confirm that the Star Micronics printer shows as Not connected. 

  9. Tap the printer to connect to it.

  10. When the printer shows as Connected, restart it again. When the printer turns on, it should show briefly as Not connected, and then as Connected.

  11. If the printer doesn't connect automatically when you restart it for the second time, then you need to enable auto-connect.

  12. Test the printer by printing a test receipt.

If you still have trouble using the receipt printer after trying these steps, then contact Shopify Support.

文章内容泉源：Shopify商户官方网站


更多
【网站地图】【sitemap】